ZER TEMP MONITOR CELLULAR MANUAL
ZER TEMP MONITOR CELLULAR TRIAL

MarCELL Cellular Monitoring System: Best Cellular SensorPush Wireless Thermometer & Hygrometer: Runner-Up Temp Stick WiFi Temperature & Humidity Sensor: Best Overall WiFi Temperature Sensor & Remote Temperature Sensor Reviews.Manufacturers must ensure that their products meet essential health and safely requirements and undergo appropriate conformity procedures.

ĪTEX regulations apply to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, and also protective systems. The ATEX regulation removes the need for separate testing by joining the technical and legal standards for manufacturing of equipment that may potentially be used in explosive atmospheres. One that applies to equipment manufacturers and another for its end users, both Directives came into effect on 1 July 2003. It is based on the requirements of two European Directives. It is the name commonly given to the framework for controlling explosive atmospheres and the standards of equipment and protective systems used in them. Q: What is ATEX?Ī: The term 'ATEX' comes from the French word 'atmosphére explosibles'. Please note: OEM customers must hold a notified body Quality Assurance Notification (QAN) and ensure that the load cell and amplifier assembly is submitted for ATEX certification by an appropriate body.

Q: Can I embed the OEM ALA5 device into my own loadcell?Ī: Yes, the ICA5ATEX amplifier is designed to fit into a pocket in a certified loadcell. Q: Is a barrier needed for Zones 1 and 2?Ī: Yes, a barrier is needed for all ATEX installations. Q: What is the maximum cable length for the load cell connections?Ī: Maximum is 2 metres.

ZER TEMP MONITOR CELLULAR MANUAL

Please refer to the manual for the EC examination certificate detailing the maximum allowable cable capacitance and inductance. Q: Can I extend the output cable on the ALA5?Ī: Yes by use of an ATEX approved junction box. Please enquire with our Sales team for more info. Q: Are there different mV/V settings available?Ī: The sensitivity can be set between 0.5 mV/V and 55 mV/V by changing the SPAN (gain) resistor. Temperature Classification – surface temperature <135☌ Intrinsic safety according to EN60079-11 (previously EN 50020) Q: What do the ATEX markings mean?ĬE0891 TRAC09ATEX1xxxX ATEX Marking details Q: What Strain Gauge parameters is the ALA5 designed for?Ī: Designed for a 1k bridge, however, 350R can be used at the expense of noise and drift performance due to the reduced excitation voltage on the bridge. Any leakage will be greater than 10M Ohms. The voltage between either of the power supply connections and the load cell shield should not exceed 50V. For other values an alternative calibration resistor can be fitted (see manual). Recommended bridge impedance is 1000 Ohmsįactory setting is the typical value shown. Click 'Quote / Price Request' top right to request more information.

ZER TEMP MONITOR CELLULAR TRIAL

Please contact us to discuss your requirements.Įvaluation units available for trial and evaluation at low cost. Please note: the ICA5ATEX is approved for incorporation into load cells and other enclosures. The ALA5 can be connected to ATEX approved equipment within the hazardous zone or to non-approved ATEX equipment outside the hazardous zone provided that a suitable barrier is used.ĭesigned for fitting in-line to strain gauge sensors such as load cells, the amplifier is housed within a stainless steel IP67 NEMA 6 EMC protected enclosure and is supplied with 1m strain gauge cable and 5 m output cable.Īn OEM option is available for customers wishing to embed the ATEX amplifier within a sensor. Intrinsically safe to EN60079-11 (previously EN 50020) standards. The high performance ATEX 4-20 mA load cell amplifier provides 2-wire 4-20 mA current loop output and connects in-line for a range of signal conditioning for strain gauges, load cells, pressure and torque transducers. The ALA5 incorporates an ATEX certified 4-20 mA load cell amplifier designed for operation within hazardous zones 0,1 & 2

Zer temp monitor cellular